Breaking #Tech #Stock News: GBT (OTCPINK: $GTCH)
Seeking to Develop New EDA #Technology to Achieve Improved IC DFM (Design for
Manufacturing)
SAN DIEGO,CA - March 18, 2021 (Investorideas.com Newswire) GBT Technologies Inc. (OTCPINK: GTCH) ("GBT", or the "Company"), is seeking to develop a new EDA (Electronic Design Automation) technology to achieve IC's better DFM (Design For Manufacturing) analysis.
Read this news
featuring GTCH in full at https://www.investorideas.com/CO/GOPH/news/2021/03181EDA-Technology.asp
As
Integrated Circuits (IC) technology advances, manufacturing and complexity are
constantly growing. Microchips are being scaled down to meet the never-ending
increasing demand for more functionalities, lower power consumption, higher
performance and lower cost, creating major design and manufacturing challenges.
Especially with deep nanometer chips, manufacturing is facing massive
challenges in terms of silicon manufacturability, and yield efficiency.
Power-Performance-Area (PPA), performance and design power constraints are
making turnaround schedules for manufacturers difficult to achieve. GBT
commenced a research and development efforts to introduce an analytical system
and method to address yield considerations to help produce IC designs with the
goal of providing more yield efficient. The EDA R&D efforts will be
concentrating on DFM rules analysis, physical layout geometrical rules (DRC)
and nanometer silicon modeling. The planned solution will be a real-time,
interactive guiding system with the goal of enabling DFM advice/auto-correction
early during the microchip's design stage. GBT already started to address a key
dependency between manufacturing and IC design; the Design Rule Check (DRC)
aspect. IC DRC rules are geometrical design constraints, imposed by the
manufacturing process. These constraints are enforced due to manufacturing
process limitations and typically required long design time to achieve
compliance. The new approach will target to embed DFM manufacturing rules along
with geometrical rules check (DRC) to advise designers with the goal of making
their IC design more compatible for manufacturing. The goal is to increase
silicon yield, obeying to power and performance constraints, through early
adherence of DFM rules, rather than complying only with DRC rules.
"The quest to comply with DFM rules has become a true
challenge, especially as we dive into advanced nanometer nodes. As part of our
ongoing EDA R&D efforts we identified IC verification domains that are a
bottleneck for design schedules and time to market factors. We already
addressed major time-consuming topics in this area which are geometrical rules
(DRC) and reliability verification (RV). As we expand our EDA physical design
solutions, we plan to address DFM (Design for Manufacturing) recommended rules,
combining them with DRC rules to enable robust analytics to shortened advanced
nodes ICs design while obeying power constraints and performance to increase
the silicon yield. Ultimately all physical aspects of a microchip design affect
each other and have mutual implications. Therefore, our approach is to address
them together within one integrated analysis, including their dependencies. We
believe that this is the best way to deliver a comprehensive, effective DFM
aware solution. By taking into effect the IC's design area, the DRC and the DFM
recommended rules we aim to significantly improve the yield, especially for
deep nanometer nodes like 5nm and below. With this approach, we target to
implement machine learning IC physical layout statistical modeling for critical
areas analysis and other manufacturing related topics. We truly believe that
only by addressing these topics as one homogenous EDA solution, an effective
signoff design for DFM can be achieved" stated Danny Rittman, the Company's
CTO.
There
is no guarantee that the Company will be successful in researching, developing
or implementing this system. In order to successfully implement this concept,
the Company will need to raise adequate capital to support its research and, if
successfully researched, developed and granted regulatory approval, the Company
would need to enter into a strategic relationship with a third party that has
experience in manufacturing, selling and distributing this product. There is no
guarantee that the Company will be successful in any or all of these critical
steps.
About Us
GBT
Technologies, Inc. (OTC PINK: GTCH) ("GBT") (http://gbtti.com) is a development stage company which
considers itself a native of Internet of Things (IoT), Artificial Intelligence
(AI) and Enabled Mobile Technology Platforms used to increase IC performance.
GBT has assembled a team with extensive technology expertise and is building an
intellectual property portfolio consisting of many patents. GBT's mission, to
license the technology and IP to synergetic partners in the areas of hardware
and software. Once commercialized, it is GBT's goal to have a suite of products
including smart microchips, AI, encryption, Blockchain, IC design, mobile
security applications, database management protocols, with tracking and
supporting cloud software (without the need for GPS). GBT envisions this system
as a creation of a global mesh network using advanced nodes and super
performing new generation IC technology. The core of the system will be its
advanced microchip technology; technology that can be installed in any mobile
or fixed device worldwide. GBT's vision is to produce this system as a low
cost, secure, private-mesh-network between all enabled devices. Thus, providing
shared processing, advanced mobile database management and sharing while using
these enhanced mobile features as an alternative to traditional carrier
services.
Forward-Looking
Statements
Certain
statements contained in this press release may constitute "forward-looking
statements". Forward-looking statements provide current expectations of
future events based on certain assumptions and include any statement that does
not directly relate to any historical or current fact. Actual results may differ
materially from those indicated by such forward-looking statements because of
various important factors as disclosed in our filings with the Securities and
Exchange Commission located at their website (http://www.sec.gov). In addition
to these factors, actual future performance, outcomes, and results may differ
materially because of more general factors including (without limitation)
general industry and market conditions and growth rates, economic conditions,
governmental and public policy changes, the Company's ability to raise capital
on acceptable terms, if at all, the Company's successful development of its
products and the integration into its existing products and the commercial
acceptance of the Company's products. The forward-looking statements included
in this press release represent the Company's views as of the date of this
press release and these views could change. However, while the Company may
elect to update these forward-looking statements at some point in the future,
the Company specifically disclaims any obligation to do so. These
forward-looking statements should not be relied upon as representing the
Company's views as of any date subsequent to the date of the press release.
Contact:
Dr.
Danny Rittman, CTO
press@gopherprotocol.com
GBT Technologies
Inc. (OTCQB:GTCH) is a featured tech stock on
More info on GTCH at Investorideas.com Visit: https://www.investorideas.com/CO/GOPH/
Get News Alerts on
GBT Technologies Inc GTCH
Disclaimer/Disclosure: Investorideas.com is a
digital publisher of third party sourced news, articles and equity research as
well as creates original content, including video, interviews and articles.
Original content created by investorideas is protected by copyright laws other
than syndication rights. Our site does not make recommendations for purchases
or sale of stocks, services or products. Nothing on our sites should be
construed as an offer or solicitation to buy or sell products or securities.
All investing involves risk and possible losses. This site is currently
compensated for news publication and distribution, social media and marketing,
content creation and more. Disclosure is posted for each compensated news
release, content published /created if required but otherwise the news was not
compensated for and was published for the sole interest of our readers and
followers. Disclosure: GTCH is a PR, social media and publishing client and
compensates Investorideas.com https://www.investorideas.com/About/News/Clientspecifics.asp
Contact management and IR of each company directly
regarding specific questions.
More disclaimer info: https://www.investorideas.com/About/Disclaimer.asp Learn
more about publishing your news release and our other news services on the
Investorideas.com newswire https://www.investorideas.com/News-Upload/ and
tickertagstocknews.com
Global
investors must adhere to regulations of each country. Please read
Investorideas.com privacy policy: https://www.investorideas.com/About/Private_Policy.asp
Get more tech stocks investor ideas- news, articles, podcasts and stock directories
No comments:
Post a Comment